Enter the mg on your vial label and the water added to get concentration. Then enter the amount from your prescription or label to get mL and U-100 syringe units; no amount is filled in for you.
Emergency: call 911 (or your local emergency number). Possible overdose or wrong amount: Poison Help, 1-800-222-1222, free and open 24 hours. Report a bad reaction to the FDA through MedWatch.
Your answer is saved only in this browser so you are not asked again. See the privacy policy.
Preset buttons are common vial label sizes in mg, not doses.
| Step | Formula |
|---|---|
| Concentration | mg in the vial ÷ mL of water |
| Volume | your amount ÷ concentration |
| U-100 syringe units | volume in mL × 100 |
Enter your amount in mg. If your label gives mcg, divide by 1,000 first (1 mg = 1,000 mcg).
A 10 mg vial mixed with 2 mL of water holds 10 ÷ 2 = 5 mg per mL.
On a U-100 syringe, 100 units = 1 mL, so 10 units = 0.1 mL. At 5 mg/mL, 0.1 mL holds 5 × 0.1 = 0.5 mg, and 1 unit holds 0.05 mg (50 mcg).
Units = (your amount in mg ÷ concentration in mg/mL) × 100. Put in the amount from your own prescription or label. If the result is below 1 unit or above the syringe capacity, check whether mg and mcg were mixed up.
This peptide reconstitution calculator uses the same three formulas you would use on paper. Adding water never changes how many milligrams are in the vial. It only changes how many milligrams sit in each millilitre.
| What you want | Formula | Unit |
|---|---|---|
| Concentration | mg in vial ÷ mL of water | mg/mL |
| Volume to draw | your amount (mg) ÷ concentration | mL |
| U-100 syringe units | volume (mL) × 100 | units |
The three formulas
Why U-100 units are volume, not drug amount. "U-100" comes from insulin: U-100 insulin contains 100 units per mL, and its label says to use only a U-100 syringe[1]. The marks on that syringe are therefore 1/100 of a mL each. When you draw any other solution with it, a "unit" mark tells you volume only. How much peptide that volume holds depends on the concentration you mixed.
Syringe size. A syringe can only be read as finely as the marks printed on its barrel, so check the scale on your own syringe. A 0.3 mL U-100 syringe holds 30 units, a 0.5 mL holds 50 and a 1 mL holds 100: the units per mL stay the same, only the capacity changes.
This peptide conversion table is pure arithmetic: vial size ÷ water = concentration, and 10 units on a U-100 syringe = 0.1 mL. It is a table for reading syringe marks, not a table of amounts to use.
| Vial size | 1 mL water | 2 mL water | 3 mL water |
|---|---|---|---|
| 5 mg | 5 mg/mL · 0.5 mg per 10 units | 2.5 mg/mL · 0.25 mg per 10 units | 1.67 mg/mL · 0.17 mg per 10 units |
| 10 mg | 10 mg/mL · 1 mg per 10 units | 5 mg/mL · 0.5 mg per 10 units | 3.33 mg/mL · 0.33 mg per 10 units |
| 20 mg | 20 mg/mL · 2 mg per 10 units | 10 mg/mL · 1 mg per 10 units | 6.67 mg/mL · 0.67 mg per 10 units |
| 30 mg | 30 mg/mL · 3 mg per 10 units | 15 mg/mL · 1.5 mg per 10 units | 10 mg/mL · 1 mg per 10 units |
Each cell: concentration, then mg held in 10 units (0.1 mL). Values rounded to 2 decimals.
mL to units. On a U-100 syringe, units = mL × 100. So 0.5 mL = 50 units, 0.25 mL = 25 units and 0.1 mL = 10 units. This holds for any liquid, because the marks measure volume.
mcg to units (for example 200 mcg or 500 mcg). There is no single answer: it depends on the concentration in your vial. First convert mcg to mg (divide by 1,000), then use units = (mg ÷ mg/mL) × 100. The table below shows how much one mark holds at a few concentrations, so you can check your own result.
| Concentration | In 1 unit | In 10 units |
|---|---|---|
| 1 mg/mL | 10 mcg | 100 mcg |
| 2 mg/mL | 20 mcg | 200 mcg |
| 2.5 mg/mL | 25 mcg | 250 mcg |
| 5 mg/mL | 50 mcg | 500 mcg |
| 10 mg/mL | 100 mcg | 1,000 mcg |
Amount held per syringe mark at a given concentration (arithmetic: 1 unit = 0.01 mL).
mg to mL. mL = mg ÷ concentration in mg/mL. ng/mL to mg/mL. 1 mg = 1,000 mcg = 1,000,000 ng, so 1 mg/mL = 1,000,000 ng/mL, and 1 ng/mL = 0.000001 mg/mL.
Every change to how the calculator works is listed here with its date. The formulas are checked by automated tests before each release.
| Date | Change |
|---|---|
| 2026-11-17 | First release: concentration, volume, U-100 units and units back to amount. |
| 2026-11-18 | Math moved to a tested module; working shown step by step; warnings for results under 2 units, over the syringe, or a likely mg/mcg mix-up. |
Direct answers to what people search for. Bracketed numbers point to the sources at the end; the sections above have the detail.
Not with a general formula. An International Unit is a value WHO assigns to a reference preparation of a specific substance[4], so a mcg-to-IU factor only exists where a product label states one. The "units" on a U-100 syringe are volume marks, not IU.
On a U-100 syringe, 1 mL = 100 units, so 0.5 mL = 50 units and 0.1 mL = 10 units. On a U-40 syringe, 1 mL = 40 units.
No. The milligrams in the vial stay the same. More water lowers the concentration, so the same amount takes up more units on the syringe.
Usually because of rounding, a mcg value entered as mg, or a syringe that is not U-100. Re-run the three formulas on this page by hand to see which step differs.
The math is the same for 0.3 mL, 0.5 mL and 1 mL U-100 syringes: 100 units per mL. Only the capacity differs (30, 50 or 100 units), so check the result fits the syringe you have.
No. The calculator runs in your browser and does not send or store what you type.