Guide

How to read an insulin syringe

An insulin syringe is marked in units, not mL. On the common U-100 type, 100 units fill 1 mL, so each unit is 0.01 mL.

Facts checked 2026-11-20 · by PeptMentor Team · How we source

On this page

Quick answer

On a U-100 syringe, 100 units = 1 mL, so 10 units = 0.1 mL and 50 units = 0.5 mL. On a 100-unit (1 mL) syringe each line is 2 units; on a 50-unit or 30-unit syringe each line is 1 unit[1].

Emergency: call 911 (or your local emergency number). Possible overdose or wrong amount: Poison Help, 1-800-222-1222, free and open 24 hours. Report a bad reaction to the FDA through MedWatch.

What one line is worth depends on the size of the syringe.

What each line means, by syringe size

SyringeHoldsEach lineEach line in mL
0.3 mL30 units1 unit0.01 mL
0.5 mL50 units1 unit0.01 mL
1 mL100 units2 units0.02 mL

U-100 syringes. Line spacing from the NPHF Starting Insulin patient guide; mL is arithmetic (units ÷ 100).

Some small syringes also show half-unit marks[1]. The numbers printed on the barrel are units, so on a 1 mL syringe the line between 10 and 20 that is three lines past 10 reads 16 units.

How to read it, step by step

  1. Check it says U-100

    U-100 means the scale is made for liquid with 100 units in each mL, like U-100 insulin, which has "100 units of insulin human in each milliliter"[2]. A U-40 syringe has a different scale (see below).

  2. Find the size

    The largest number on the barrel tells you the size: 30, 50 or 100 units. That tells you whether each line is 1 or 2 units.

  3. Count from the nearest number

    Start at the printed number just below your mark and add one line's worth for each line after it.

  4. Turn units into mL if you need to

    Divide by 100. 25 units is 0.25 mL; 8 units is 0.08 mL.

Insulin syringe units to mL chart

UnitsmLFits in
50.050.3, 0.5 or 1 mL
100.10.3, 0.5 or 1 mL
200.20.3, 0.5 or 1 mL
250.250.3, 0.5 or 1 mL
300.30.3, 0.5 or 1 mL
400.40.5 or 1 mL
500.50.5 or 1 mL
750.751 mL
10011 mL

U-100 only: mL = units ÷ 100.

How much drug a mark holds depends on what is in the syringe. For a mixed peptide vial, use the units to mg calculator or the mg to units calculator.

U-100 vs U-40 syringes

Some insulins hold 40 units per mL and are drawn with U-40 syringes; one FDA-approved label says using any other syringe "will result in incorrect dosing"[3]. On a U-40 syringe, 40 marks fill 1 mL, so 10 marks are 0.25 mL, not 0.1 mL. Everything on this page is for U-100.

How to read an insulin syringe: questions people ask

Direct answers to what people search for. Bracketed numbers point to the sources at the end; the sections above have the detail.

How much is 0.5 on an insulin syringe?

On a U-100 syringe, 0.5 mL is 50 units: halfway up a 1 mL syringe, or the full 0.5 mL syringe.

Is 1 mL 10 units on an insulin syringe?

No. On a U-100 syringe 1 mL is 100 units; 10 units is 0.1 mL.

How much is 20 units on an insulin syringe?

20 units is 0.2 mL on a U-100 syringe. On a 1 mL syringe that is 10 lines; on a 0.3 or 0.5 mL syringe it is 20 lines.

Are syringe units the same as IU?

Not in general. Syringe units are volume marks. See IU vs units on a syringe.